GE SmartVent 7900 Anesthesia Ventilator
GE SmartVent 7900 Anesthesia Ventilator
0 Artículo está en su carrito Ver carrito ahora
Términos y Condiciones del Listado
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The GE SmartVent 7900 is an anesthesia ventilator with internal monitors for inspired oxygen, airway pressure, and exhaled volume. The 7900 provides both volume and pressure control. This ventilator allows for automatic compensation of compression losses, changes in fresh gas concentration, and small leaks within the absorber and bellows with the unique SmartVent™ tidal volume compensation system.
The GE SmartVent 7900 is available through Avante Health Solutions. Contact an Avante representative today for more information.
Features
- Bundled as an optional feature to the Aestiva 5
- Adjustable flow trigger provides automatic breathing synchronization
- Pressure support provided in combination with the SIMV mode
- Volume and Pressure modes with electronic PEEP
- Synced Intermittent Mandatory Ventilation (SIMV)
- Direct access to ventilator parameter settings
- Pressure Supported Ventilation (PSVPro) with Apnea backup mode
- Smart alarms direct user to specific problems and affected parameters
- Ideal for spontaneously breathing patients
- Full patient range capability
SIMV
- Automatic synchronization with mandatory breaths
- Adjustable respiratory rate from 2-60bpm
- Assured rate and tidal volume for minimum minute ventilation
- Adjustable trigger window to allow fine-tuning to the patient’s breathing pattern
PSVPro
- Helps decrease patient’s work of breathing
- CPAP capability
- Supports spontaneous breaths
- Decelerating flow pattern
- Adjustable inspiration termination to fine-tune to the patient’s breathing pattern
- Automatic apnea backup mode
- Available to be used with most LMAs
Specifications
Dimensions
- Height: 15 cm/5.9 in
- Width: 25 cm/9.8 in
- Depth: 38 cm/15 in
- Weight: 15 kg/33 lbs
Electrical
- Power Input: 110/120 Va-c 10%, 50/60 Hz; 220/240 Va-c 10%, 50/60 Hz; 54.5 Watts
- Backup Battery: Internal rechargeable battery - 30 min
Gas Supply
- Gas source: Anesthesia system
- Gas composition: Medical air or oxygen
- Nominal supply pressure: 350 kPa/50 psig
- Pressure range at inlet: 240 to 700 kPa/35 to 100 psig
- Peak gas flow: 120 L/min at 240 kpa/35 psig, 0.75 seconds
- Continuous gas flow: 80 L/min at 240 kPa/35 psig
- Flow valve range: 1 to 120 L/min at 35 psig
- Flow compensation range: 200 mL/min to 15 L/min
- Gas composition: O2, N2O, N2, Air, Heliox, CO2, anesthetic agents
Parameters
- Volume delivery: ±7% or 11 mL
- Pressure delivery: ±10% or ±3 cm H2O
- Volume monitoring: ±9% or 9 mL
- Pressure monitoring: ±5% or ±2 cm H2O
Documentos y Recursos
