Spacelabs 90369 Ultraview
Spacelabs 90369 Ultraview
0 item is in your cart. View cart now
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
Ultraview 1050 Monitor 90369
- Lightweight, compact, highly portable
- Shares same touchscreen controls as other Ultraview Care Network™ and PCMS™ monitors of appropriate levels
- Compatible with the full line of Ultraview Care Network and PCMS modules
- Large, 10.4-inch (26.42 cm), TFT color display with 140° viewing angle
- Data Shuttle® option allows up to 24 hours of patient data to be transferred to other Ultraview Care Network and PCMS monitors
- Advanced power management system maximizes battery performance during transport; includes battery "fuel-gauge"
- Optional interactive bed-to-bed Ethernet communication
- Instant "Quicknet" 10BaseT Ethernet connection
- Optional wireless Ethernet with one to five outbound waveforms and numeric vital signs transmitted at 2.4 GHz
- Optional built-in 2-channel recorder
- Optional mainstream EtCO2, O2, and Min CO2
- Support for up to 250 nodes on a network with the Expanded Network feature.
Specifications
Physical Weight & Dimensions
- Height: 8.3 inches (21.1 cm)
- Depth: 6.2 inches (15.8 cm)
- Width: 11.7 inches (29.7 cm)
- Weight: 10.0 Ibs (4.6 kg)
General
- Touchscreen: With the exception of power (ON/OFF), all controls are on-screen touchkeys; touch is sensed by infrared optical devices; optional controls include mouse and keyboard
- Waveform Capacity: four, five, or six waveforms
- Module Capacity: 90369 accepts one Ultraview or PCMS module internally and will support up to two additional modules using the 90499 module housing
- Parameter Capacity: 18 parameters utilizing Ultraview and PCMS modules as well as Flexport® interfaces
- Trends: 24 hours of trend data can be displayed
- Graphic: 1-, 2-, 6-,12- or 24-hour segments; data is stored in 1-minute resolutions (6-hour segment is the default)
- Tabular: Time increments of 1, 5, 10, 15, or 30 minutes; 1, 1.5 or 3 hours (1 hour is the default)
- Remote View/Alarm Watch: When equipped with the Ethernet option, the 1050 provides a waveform display from a remote bedside or telemetry patient on the Ultraview network either on request (Remote View) and/or in response to an alarm (Alarm Watch); the 1050 provides a waveform display from up to 32 selected beds; an Ultraview bedside monitor can be remotely viewed by up to 16 network devices simultaneously (e.g., monitors, workstations)
Electrical
- Mains Power: Line voltage: 100-240 VAC; Frequency: 50-60 Hz
- Batteries: Both sealed-lead acid (SLA) and Spacelabs Medical nickel metal hydride (NiMH) are supported. One or two 12 V (2.30 Ah SLA or 2.45 Ah NiMH) batteries may be used, providing up to 2.0 hours of operation (TFT display) for up to 300 charge/discharge cycles with SLA and up to 2.5 hours of operation (TFT display) for up to 600 charge/discharge cycles with NiMH; operating time is dependent on configuration and usage; 1.5 hours are required to charge batteries to 100% of capacity with AC connected to rear panel and mains switch in the OFF position, 3-hour charge time required with the mains switch in the ON position
- Power Fail Backup: Will maintain patient data for a minimum of three minutes
- Isolation: Chassis leakage current not greater than 300 ìA (meets AAMI, UL2601-1, CSA #601.1 and IEC 601-1 standards)
